RenoV

RenoV

Renovation cream for end users

ANTISTICKING TO DEPOSITS AND POLLUTION.
Based on the HyDRoPTM system, the leading patented technology for permanent glass protection.

HIGH PERFORMANCE GLASS RESTORATION & POLISHING COMPOUND. PATENTED FORMULA.

Fine polishing of corroded, etched, lime scale oxidized or marred glass is a tough challenge. RenoV is the right product to make the restoration process a bit faster and easier.
Based on a patented formulation consisting of five active ingredients RenoV is the most efficient product available for the restoration of heavy staining, arising from lime scale, sea salt, pollution, acid rain, soap scum and various contaminants.
It is the ultimate choice when a perfect balance between chemical enhanced polishing, a fast cut and crystal clear finish is absolutely necessary. It can be used as a single polishing compound or as the final polishing step in multi-stage processing.

Content: 200 ml

APPLICATION

RenoV can be used with a soft sponge for light surface renovation or with powered hand devices (up to 1,500 RPM) for light scratch and surface repair.
It can also be used In continuous production environment with motorized devices.

€36.00

What is  the hyDRoPTM system?

The (HyDRoPTM) system is a patented technology of BFP. It is an innovative protective coating system for glass surfaces.
(HyDRoPTM) effectively combines the properties of both inorganic and organic materials within a multi-functional non-stick (easy-to-clean) invisible coating.
Activation of the surface promotes the development of a large number of free active sites, on which the protective coating is anchored. The latter shares electrons with the substrate and ultimately, a permanent covalent bond (about 230 Kilo-joule per mol) between them is formed. As a result, the coating exhibits an unparallel resistance to chemicals, temperature changes, UV and abrasion.
(HyDRoPTM) is a trademark of BFP Advanced Technologies.

CERTIFICATIONS & TESTS
ISO 11998:2006: Durability tests – Determination of wet-scrub resistance and cleanability of coatings – TÜV ISO 11507:2007: Exposure of coatings to artificial weathering – Exposure to fluorescent UV lamps, temperature and water. Correlation to hydrophobicity reduction and cleanability of coatings – TÜV ISO 2409:2013: Cross-cut test – Adhesion – TÜV ASTM E891: Solar spectra irradiance – Change in the optical properties (reflection, transmission, absorption) of coated glass after abrasion and aging – NCSR Demokritos DIN 50018/DIN 50021: Acid corrosion tests – Salt spray tests – NTUA EN 1096-2 (class A)/EN 14428: Requirements and test methods for class A, B and S coatings. Functional requirements and test methods. Chemical resistance to acids-alkalis, humidity and organic solvents – NTUA
Packaging

SolarSkin FOR SOLAR WATER HEATERS is a non-stick coating system based on latest generation nanotechnology. It consists of two liquid mixtures, which are applied sequentially. The surface should be absolutely clean prior to application.
SolarSkin [1] chemically activates the surface, while SolarSkin [2] is the coating solution. After application, the surface should be buffed with a clean dry cloth to remove traces of excess liquid. It will take about 24 hours for the coating to obtain its maximum strength.

en_US
el en_US
Skip to content