NanoSkin™ ULTRA

for glass surfaces

GLASS PROTECTIVE COATING KIT

ANTISTICKING TO LIMESCALE AND SOILING.

Based on the patented HyDRoPTM system, the leading technology for glass protection.

Buy now

NanoSkin forms on glass surfaces an invisible, highly enduring coating which renders them anti-sticking to limescale, stains and dirt, thus allowing much easier cleaning, less often.
NanoSkin also prevents glass deterioration caused by deposits and corrosion.

INVISIBLE PROTECTION FOR:

  1. GLASS SHOWER ENCLOSURES BEFORE INSTALLATION
  2. WINDOWS & FACADES
  3. GLASS RAILINGS AND POOL FENCES

Benefits

NanoSkin ULTRA upgrades glass and converts it to long-lasting non-stick glass, which is always easier to clean.

1. ONCE ONLY APPLICATION (BY SPRAYING)
2. SURFACES BECOME PERMANENTLY NON-STICK
3. PREVENTS LIME BUILD UP
4. PASSIVE ANTIMICROBIAL PROTECTION
5. ENHANCED OLEOPHOBIC PROPERTIES
6. CLEANING TIME IS DRAMATICALLY REDUCED
7. NO NEED FOR HARSH CLEANING METHODS AND CHEMICALS
8. INHIBITS SURFACE CORROSION
9. 5 YEARS WARRANTY
10. PROTECTS THE ENVIRONMENT

Content: 2 x 60 ml  | Coverage: 4 m2

What is  the hyDRoPTM system?

The (HyDRoPTM) system is a patented technology of BFP. It is an innovative protective coating system for glass surfaces.
(HyDRoPTM) effectively combines the properties of both inorganic and organic materials within a multi-functional non-stick (easy-to-clean) invisible coating.
Activation of the surface promotes the development of a large number of free active sites, on which the protective coating is anchored. The latter shares electrons with the substrate and ultimately, a permanent covalent bond (about 230 Kilo-joule per mol) between them is formed. As a result, the coating exhibits an unparallel resistance to chemicals, temperature changes, UV and abrasion.
(HyDRoPTM) is a trademark of BFP Advanced Technologies.

CERTIFICATIONS & TESTS

ISO 11998:2006:Durability tests – Determination of wet-scrub resistance and cleanability of coatings – TÜV
ISO 11507:2007:Exposure of coatings to artificial weathering – Exposure to fluorescent UV lamps, temperature and water. Correlation to hydrophobicity reduction and cleanability of coatings – TÜV
ISO 2409:2013:Cross-cut test – Adhesion – TÜV
ASTM E891:Solar spectra irradiance – Change in the optical properties (reflection, transmission, absorption) of coated glass after abrasion and aging – NCSR Demokritos
DIN 50018/DIN 50021:Acid corrosion tests – Salt spray tests – NTUA
EN 1096-2 (class A)/EN 14428:Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings / Shower enclosures. Functional requirements and test methods. Chemical resistance to acids-alkalis, humidity and organic solvents – NTUA

TECHNOLOGY – APPLICATION

NanoSkin ULTRA is a pioneering, permanent protective coating system based on latest generation nanotechnology. It consists of two liquid mixtures, which are applied sequentially.
NanoSkin ULTRA [1] chemically activates the surface, while NanoSkin ULTRA [2] is the coating solution. After its application, the surface should be buffed with a clean dry cloth to remove traces of excess liquid, until crystal clear. It will take about 24 hours for the coating to obtain its maximum strength.
NanoSkin ULTRA is applied only once by simple spraying. The coating can be removed only by RenoV.

NanoSkin™ PRO

for shower glass

RESTORATION AND PROTECTION KIT FOR SHOWER GLASS

ANTISTICKING TO LIMESCALE AND SOILING.

Based on the patented HyDRoPTM system, the leading technology for glass protection.

BUY NOW

NanoSkin restores glass surfaces and forms an invisible, highly enduring coating which renders them anti-sticking to limescale, stains and dirt, thus allowing much easier cleaning, less often.
NanoSkin also prevents glass deterioration caused by deposits and corrosion.

GLASS RESTORATION AND INVISIBLE PROTECTION FOR:

USED & PRE-INSTALLED GLASS SHOWER ENCLOSURES

https://www.youtube.com/watch?v=BLtocA5xceY&t=301s

Benefits

NanoSkin PRO restores old glass to its pristine “like-new” appearance and converts it to long-lasting non-stick glass, which is always easier to clean.

1. ONCE ONLY APPLICATION
2. RESTORATION OF STAINED OR CORRODED GLASS
3. SURFACES BECOME PERMANENTLY NON-STICK
4. PREVENTS LIME BUILD UP
5. PASSIVE ANTIMICROBIAL PROTECTION
6. ENHANCED OLEOPHOBIC PROPERTIES
7. CLEANING TIME IS DRAMATICALLY REDUCED
8. NO NEED FOR HARSH CLEANING METHODS AND CHEMICALS
11. INHIBITS GLASS CORROSION
12. 5 YEARS WARRANTY
13. PROTECTS THE ENVIRONMENT

Content: 3 x 65 ml  | Coverage: 4-5 m2

What is  the hyDRoPTM system?

The (HyDRoPTM) system is a patented technology of BFP. It is an innovative protective coating system for glass surfaces.
(HyDRoPTM) effectively combines the properties of both inorganic and organic materials within a multi-functional non-stick (easy-to-clean) invisible coating.
Activation of the surface promotes the development of a large number of free active sites, on which the protective coating is anchored. The latter shares electrons with the substrate and ultimately, a permanent covalent bond (about 230 Kilo-joule per mol) between them is formed. As a result, the coating exhibits an unparallel resistance to chemicals, temperature changes, UV and abrasion.
(HyDRoPTM) is a trademark of BFP Advanced Technologies.

CERTIFICATIONS & TESTS

ISO 11998:2006:Durability tests – Determination of wet-scrub resistance and cleanability of coatings – TÜV
ISO 11507:2007:Exposure of coatings to artificial weathering – Exposure to fluorescent UV lamps, temperature and water. Correlation to hydrophobicity reduction and cleanability of coatings – TÜV
ISO 2409:2013:Cross-cut test – Adhesion – TÜV
ASTM E891:Solar spectra irradiance – Change in the optical properties (reflection, transmission, absorption) of coated glass after abrasion and aging – NCSR Demokritos
DIN 50018/DIN 50021:Acid corrosion tests – Salt spray tests – NTUA
EN 1096-2 (class A)/EN 14428:Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings / Shower enclosures. Functional requirements and test methods. Chemical resistance to acids-alkalis, humidity and organic solvents – NTUA

TECHNOLOGY – APPLICATION

NanoSkin PRO is a pioneering, permanent protective coating system based on latest generation nanotechnology. It consists of three liquid mixtures, which are applied sequentially.
NanoSkin PRO [1] restores heavily stained or even slightly corroded glass (it cannot restore irreversible glass corrosion). NanoSkin PRO [2] chemically activates the surface, while NanoSkin PRO [3] is the coating solution. After its application, the surface should be buffed with a clean dry cloth to remove traces of excess liquid, until crystal clear. It will take about 24 hours for the coating to obtain its maximum strength.
NanoSkin PRO is applied only once. The coating can be removed only by RenoV.

NanoSkin™ ULTRA

for glazed tiles

PROTECTIVE COATING KIT FOR GLAZED CERAMIC TILES

ANTISTICKING TO DIRT AND LIMESCALE.
Based on the patented HyDRoPTM system.

 

BUY NOW

NanoSkin forms on glazed tiles an invisible, highly enduring coating which renders them anti-sticking to limescale, stains and dirt, thus reducing significantly the need for cleaning.
NanoSkin also prevents surface discoloration caused by deposits and corrosion.

INVISIBLE PROTECTION FOR:

GLAZED TILES

Benefits

NanoSkin ULTRA renders surfaces non-stick.

1. ONCE ONLY APPLICATION (BY SPRAYING)
2. SURFACES BECOME PERMANENTLY NON-STICK
3. PREVENTS LIME BUILD UP
4. PASSIVE ANTIMICROBIAL PROTECTION
5. SURFACES REMAIN CLEANER FOR LONGER
6. ENHANCED OLEOPHOBIC PROPERTIES
7. CLEANING TIME IS DRAMATICALLY REDUCED
8. NO NEED FOR HARSH CLEANING METHODS AND CHEMICALS
9. INHIBITS SURFACE CORROSION
10. 5 YEARS WARRANTY
11. PROTECTS THE ENVIRONMENT

Content: 2 x 60 ml  | Coverage: 4 m2

What is  the hyDRoPTM system?

The (HyDRoPTM) system is a patented technology of BFP. It is an innovative protective coating system for glass and glazed ceramic surfaces.
(HyDRoPTM) effectively combines the properties of both inorganic and organic materials within a multi-functional non-stick (easy-to-clean) invisible coating.
Activation of the surface promotes the development of a large number of free active sites, on which the protective coating is anchored. The latter shares electrons with the substrate and ultimately, a permanent covalent bond (about 230 Kilo-joule per mol) between them is formed. As a result, the coating exhibits an unparallel resistance to chemicals, temperature changes, UV and abrasion.
(HyDRoPTM) is a trademark of BFP Advanced Technologies.

CERTIFICATIONS & TESTS

ISO 11998:2006:Durability tests – Determination of wet-scrub resistance and cleanability of coatings – TÜV
ISO 11507:2007:Exposure of coatings to artificial weathering – Exposure to fluorescent UV lamps, temperature and water. Correlation to hydrophobicity reduction and cleanability of coatings – TÜV
ISO 2409:2013:Cross-cut test – Adhesion – TÜV
ASTM E891:Solar spectra irradiance – Change in the optical properties (reflection, transmission, absorption) of coated glass after abrasion and aging – NCSR Demokritos
DIN 50018/DIN 50021:Acid corrosion tests – Salt spray tests – NTUA
EN 1096-2 (class A)/EN 14428:Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings / Shower enclosures. Functional requirements and test methods. Chemical resistance to acids-alkalis, humidity and organic solvents – NTUA

TECHNOLOGY – APPLICATION

NanoSkin ULTRA is a non-stick coating system based on latest generation nanotechnology. It consists of two liquid mixtures, which are applied sequentially. The surface should be thoroughly cleaned prior to application.
NanoSkin ULTRA [1] chemically activates the surface, while NanoSkin ULTRA [2] is the coating solution. After its application, the surface should be buffed with a clean dry cloth to remove traces of excess liquid, until crystal clear. It will take about 24 hours for the coating to obtain its maximum strength.
NanoSkin ULTRA is applied only once by simple spraying. The coating can be removed only by RenoV.

NanoSkin™ PRO

for sanitary ware

PROTECTIVE COATING KIT FOR SANITARY WARE

ANTISTICKING TO DIRT AND LIMESCALE.
Based on the patented HyDRoPTM system.

 

BUY NOW

NanoSkin renovates glazed sanitary ware and forms an invisible, highly enduring coating which renders them anti-sticking to limescale, stains and dirt, thus reducing significantly the need for cleaning.
NanoSkin also prevents surface discoloration caused by deposits and corrosion.

RENOVATION & PERMANENT SURFACE PROTECTION FOR:

GLAZED & ENAMELLED SANITARY WARE

Benefits

NanoSkin PRO renovates stained sanitary ware to their pristine “like-new” appearance and renders them non-stick, which are always easier to clean.

1. ONCE ONLY APPLICATION
2. SURFACES BECOME PERMANENTLY NON-STICK
3. PREVENTS LIME BUILD UP
4. PASSIVE ANTIMICROBIAL PROTECTION
5. SURFACES REMAIN CLEANER FOR LONGER
6. ENHANCED OLEOPHOBIC PROPERTIES
7. CLEANING TIME IS DRAMATICALLY REDUCED
8. NO NEED FOR HARSH CLEANING METHODS AND CHEMICALS
9. INHIBITS SURFACE CORROSION
10. 5 YEARS WARRANTY
11. PROTECTS THE ENVIRONMENT

Content: 3 x 33 ml  | Coverage: 2-3 m2

What is  the hyDRoPTM system?

The (HyDRoPTM) system is a patented technology of BFP. It is an innovative protective coating system for glass and glazed ceramic surfaces.
(HyDRoPTM) effectively combines the properties of both inorganic and organic materials within a multi-functional non-stick (easy-to-clean) invisible coating.
Activation of the surface promotes the development of a large number of free active sites, on which the protective coating is anchored. The latter shares electrons with the substrate and ultimately, a permanent covalent bond (about 230 Kilo-joule per mol) between them is formed. As a result, the coating exhibits an unparallel resistance to chemicals, temperature changes, UV and abrasion.
(HyDRoPTM) is a trademark of BFP Advanced Technologies.

CERTIFICATIONS & TESTS

ISO 11998:2006:Durability tests – Determination of wet-scrub resistance and cleanability of coatings – TÜV
ISO 11507:2007:Exposure of coatings to artificial weathering – Exposure to fluorescent UV lamps, temperature and water. Correlation to hydrophobicity reduction and cleanability of coatings – TÜV
ISO 2409:2013:Cross-cut test – Adhesion – TÜV
ASTM E891:Solar spectra irradiance – Change in the optical properties (reflection, transmission, absorption) of coated glass after abrasion and aging – NCSR Demokritos
DIN 50018/DIN 50021:Acid corrosion tests – Salt spray tests – NTUA
EN 1096-2 (class A)/EN 14428:Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings / Shower enclosures. Functional requirements and test methods. Chemical resistance to acids-alkalis, humidity and organic solvents – NTUA

TECHNOLOGY – APPLICATION

NanoSkin PRO for sanitary ware is a pioneering, non-stick coating system based on latest generation nanotechnology. It consists of three liquid mixtures, which are applied sequentially. NanoSkin PRO [1] restores heavily stained surfaces. NanoSkin PRO [2] chemically activates the surface, while NanoSkin PRO [3] is the coating solution. After its application, the surface should be buffed with a clean dry cloth to remove traces of excess liquid, until crystal clear. It will take about 24 hours for the coating to obtain its maximum strength.

NanoSkin™ PRO

for cooktops

PROTECTIVE COATING KIT FOR CERAMIC COOKTOPS

ANTISTICKING TO SOILING  AND STAINING.
Based on the patented HyDRoPTM system.

 

BUY NOW

NanoSkin renovates ceramic cooktops and forms an invisible, highly enduring coating which renders them anti-sticking to soiling and staining, thus significantly reducing time of cleaning.
NanoSkin also prevents surface discoloration caused by deposits.

RENOVATION AND INVISIBLE PROTECTION FOR:

CERAMIC COOKTOPS

Benefits

NanoSkin PRO renovates stained ceramic cooktops to their pristine “like-new” appearance and renders them non-stick, which are always easier to clean.

1. SURFACES BECOME PERMANENTLY NON-STICK
2. CLEANING TIME IS DRAMATICALLY REDUCED
3. PREVENTS COOKTOP DISCOLORATION
4. SURFACES REMAIN CLEANER FOR LONGER
5. ENHANCED OLEOPHOBIC PROPERTIES
6. NO NEED FOR HARSH CLEANING METHODS AND CHEMICALS
7. FOOD-SAFE

Content: 3 x 21 ml  | Coverage: 1-2 m2

What is  the hyDRoPTM system?

The (HyDRoPTM) system is a patented technology of BFP. It is an innovative protective coating system for glass and glazed ceramic surfaces.
(HyDRoPTM) effectively combines the properties of both inorganic and organic materials within a multi-functional non-stick (easy-to-clean) durable coating.
(HyDRoPTM) is a trademark of BFP Advanced Technologies.

CERTIFICATIONS & TESTS

ISO 11998:2006:Durability tests – Determination of wet-scrub resistance and cleanability of coatings – TÜV
ISO 11507:2007:Exposure of coatings to artificial weathering – Exposure to fluorescent UV lamps, temperature and water. Correlation to hydrophobicity reduction and cleanability of coatings – TÜV
ISO 2409:2013:Cross-cut test – Adhesion – TÜV
ASTM E891:Solar spectra irradiance – Change in the optical properties (reflection, transmission, absorption) of coated glass after abrasion and aging – NCSR Demokritos
DIN 50018/DIN 50021:Acid corrosion tests – Salt spray tests – NTUA
EN 1096-2 (class A)/EN 14428:Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings / Shower enclosures. Functional requirements and test methods. Chemical resistance to acids-alkalis, humidity and organic solvents – NTUA

TECHNOLOGY – APPLICATION

NanoSkin PRO for ceramic cooktops is a food-safe, non-stick coating system, consisting of three liquid components, which are applied sequentially. NanoSkin PRO [1] restores heavily stained glass-ceramic surfaces. NanoSkin PRO [2] is the activator, while NanoSkin PRO [3] is the coating solution. After its application, the surface should be buffed with a clean dry cloth to remove traces of excess liquid, until crystal clear. It will take about 24 hours for the coating to obtain its maximum strength.