NanoSkin™ ULTRA for glass surfaces

NanoSkin™ ULTRA
for glass surfaces

GLASS PROTECTIVE COATING KIT

ANTISTICKING TO LIMESCALE AND SOILING.
Based on the HyDRoPTM system, the leading patented technology for permanent glass protection.

NanoSkin forms on glass surfaces an invisible, highly enduring coating which renders them anti-sticking to limescale, stains and dirt, thus allowing much easier cleaning, less often.
NanoSkin also prevents glass deterioration caused by deposits and corrosion.

Content: 2 x 60 ml  | Coverage: 4 m2

INVISIBLE PROTECTION FOR:

  1. GLASS SHOWER ENCLOSURES BEFORE INSTALLATION
  2. WINDOWS & FACADES
  3. GLASS RAILINGS AND POOL FENCES

Benefits

NanoSkin ULTRA upgrades glass and converts it to long-lasting non-stick glass, which is always easier to clean.

1. ONCE ONLY APPLICATION (BY SPRAYING)
2. SURFACES BECOME PERMANENTLY NON-STICK
3. PREVENTS LIME BUILD UP
4. PASSIVE ANTIMICROBIAL PROTECTION
5. ENHANCED OLEOPHOBIC PROPERTIES
6. CLEANING TIME IS DRAMATICALLY REDUCED
7. NO NEED FOR HARSH CLEANING METHODS AND CHEMICALS
8. INHIBITS SURFACE CORROSION
9. 5 YEARS WARRANTY
10. PROTECTS THE ENVIRONMENT

€33.50

What is  the hyDRoPTM system?

The (HyDRoPTM) system is a patented technology of BFP. It is an innovative protective coating system for glass surfaces.
(HyDRoPTM) effectively combines the properties of both inorganic and organic materials within a multi-functional non-stick (easy-to-clean) invisible coating.
Activation of the surface promotes the development of a large number of free active sites, on which the protective coating is anchored. The latter shares electrons with the substrate and ultimately, a permanent covalent bond (about 230 Kilo-joule per mol) between them is formed. As a result, the coating exhibits an unparallel resistance to chemicals, temperature changes, UV and abrasion.
(HyDRoPTM) is a trademark of BFP Advanced Technologies.

CERTIFICATIONS & TESTS

ISO 11998:2006:Durability tests - Determination of wet-scrub resistance and cleanability of coatings - TÜV
ISO 11507:2007:Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps, temperature and water. Correlation to hydrophobicity reduction and cleanability of coatings - TÜV
ISO 2409:2013:Cross-cut test – Adhesion - TÜV
ASTM E891:Solar spectra irradiance – Change in the optical properties (reflection, transmission, absorption) of coated glass after abrasion and aging - NCSR Demokritos
DIN 50018/DIN 50021:Acid corrosion tests - Salt spray tests - NTUA
EN 1096-2 (class A)/EN 14428:Glass in building. Coated glass. Requirements and test methods for class A, B and S coatings / Shower enclosures. Functional requirements and test methods. Chemical resistance to acids-alkalis, humidity and organic solvents – NTUA

TECHNOLOGY - APPLICATION

NanoSkin ULTRA is a pioneering, permanent protective coating system based on latest generation nanotechnology. It consists of two liquid mixtures, which are applied sequentially.
NanoSkin ULTRA [1] chemically activates the surface, while NanoSkin ULTRA [2] is the coating solution. After its application, the surface should be buffed with a clean dry cloth to remove traces of excess liquid, until crystal clear. It will take about 24 hours for the coating to obtain its maximum strength.
NanoSkin ULTRA is applied only once by simple spraying. The coating can be removed only by RenoV.

en_US
el en_US
Skip to content